AS/NZS 3190:2016

Table of Contents

Abstract

This Standard provides Australian and New Zealand electrical industries (including manufacturers, test laboratories, installers and regulators) with electrical safety requirements and test methods for residual current devices (current-operated earth-leakage devices).

Scope

This Standard specifies essential safety requirements for residual current devices and residual current relays intended to isolate supply or initiate a ‘tripping’ signal to isolate supply to protected circuits, socket-outlets or equipment in the event of a current flow to earth, which exceeds a predetermined level, and-
(a) have rated residual currents not exceeding 300 mA;
(b) have rated load currents not exceeding 125 A a.c.;
(c) are designed for use at low voltage; and
(d) are classified in accordance with Clause 4.
The devices may be either fixed or portable; integral with a switching device; miniature overcurrent circuit breaker; or supplied as a separate attachment.
This Standard does not apply to-
(i) devices intended to be used with a particular circuit breaker other than a miniature overcurrent circuit-breaker, as defined in AS/NZS 3111 or AS/NZS 60898.1;
(ii) devices intended to protect an electricity authority distribution system; or
(iii) devices for the protection of equipment for mines and covered by the AS/NZS 2081 series of Standards.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
Pages
ISBN
Committee	EL-004
Supersedes	DR2 AS/NZS 3190:2015