Methods of test for textiles Dimensional change - Determination of dimensional change of yarns and sewing threads
Standards Australia
Sets out a method for determining the dimensional change of yarns and sewing threads after immersion in a standard test solution. Two alternative test solution temperatures are given.
RECONFIRMATION NOTICE
Technical Committee TX-020 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 6 July 2016.
The following are represented on Technical Committee TX-020:
Ag Research
Australian Wool Processors Council
AWTA Textile Testing
Council of Textile and Fashion Industries of Australia
Drycleaning Institute of Australia
National Association of Testing Authorities Australia
RMIT University
The Textile Institute
This Standard sets out a method for determining the dimensional change of yarns and sewing threads after immersion in a standard test solution.
The method describes two alternative test solution temperatures as follows:
(a) Test A-Solution temperature 40 C.
(b) Test B-Solution temperature 100 C.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 05/08/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 05/08/2016 |
| Committee | TX-020 |
| Supersedes |
|
