Methods of test for textiles Physical tests - Determination of bursting pressure of textile fabrics - Hydraulic diaphragm method
Standards Australia
Specifies two methods of determining the bursting pressure of both wet and dry fabrics of all types.
RECONFIRMATION NOTICE
Technical Committee TX-020 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 6 July 2016.
The following are represented on Technical Committee TX-020:
Ag Research
Australian Wool Processors Council
AWTA Textile Testing
Council of Textile and Fashion Industries of Australia
Drycleaning Institute of Australia
National Association of Testing Authorities Australia
RMIT University
The Textile Institute
This Standard sets out two methods for determining the bursting pressure of both wet and dry fabrics.
Method A-Constant flow rate. Method B-Constant time to rupture.
NOTE: The results obtained by the two methods may not be comparable.
The methods are applicable to all textile fabrics. They are particularly applicable to knitted and other fabrics for which breaking or tearing force determinations are not suitable.
A method for the preparation of fabrics with an extensibility greater than that of the thin flexible diaphragm is given in Appendix A.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 05/08/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 05/08/2016 |
| Committee | TX-020 |
| Supersedes |
|
