AS 2755.3-1988 (R2013)
AS 2755.3-1988 (R2013)
Textile fabrics - Determination of burning behaviour Determination of surface burning time
Standards Australia
Abstract
Specifies a method for the measurement of surface burning properties of textile fabrics which have raised fibre surface, i.e. napped, pile, tufted, flocked or similar surface. The surface of the test specimen is ignited near the top by a small heat source and the spread of flame downwards on the surface of the fabric to a reference line is timed.
RECONFIRMATION NOTICE
Technical Committee CS-086 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 4 June 2013.
The following are represented on Technical Committee CS-086:
Australian and New Zealand Burn Association
Australian Competition and Consumer Commission
Australian Compliance Institute
Australian Industry Group
Australian Retailers Association
AWTA Textile Testing
Consumers Federation of Australia
Council of Textile and Fashion Industries of Australia
CSIRO Manufacturing & Materials Technology
Kidsafe
Ministry of Consumer Affairs (New Zealand)
National Retailers Association
NSW Office of Fair Trading
Retail and Wholesale Merchants Association of New Zealand
RMIT University
Royal New Zealand Plunket Society
To view or download a copy of the reconfirmation notice please go to the reconfirmation link near the top of this page.
Scope
This Standard specifies a method for the measurement of surface burning time of textile fabrics which have a raised fibre surface, i.e. napped, pile, tufted, flocked, or similar surface. This test simulates the surface burning properties of textiles from a small heat source or where the ignition source is likely to be of a fleeting nature.
NOTE: This Standard complies with AS 2744.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 11-07-2013 |
| Committee | CS-086 |
| Supersedes |
|
