AS 2652-1983 (R2016)
AS 2652-1983 (R2016)
Liquid hydrocarbons - Volumetric measurement by displacement meter systems other than dispensing pumps
Standards Australia
Table of Contents
Abstract
Provides guidance for the design, installation, operation and maintenance of metering systems having one or more displacement meters. Its content is common to all displacement meters. A typical arrangement of a meter station with three displacement meters is shown. Technically equivalent with ISO 2714.
RECONFIRMATION NOTICE
Technical Committee ME-049 has reviewed the content of this publication and in
accordance with Standards Australia procedures for reconfirmation, it has been
determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the
original date of publication. Users are advised to ensure that they are using the latest
versions of such documents as appropriate, unless advised otherwise in this
Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for
reconfirmation on 23 December 2015.
The following are represented on Technical Committee ME-049:
Australian Institute of Petroleum
Australian Petroleum Production and Exploration Association
Institute of Instrumentation, Control and Automation Australia
National Association of Testing Authorities Australia
National Measurement Institute
Scope
This standard specifies the characteristics of displacement meters and gives requirements for their design and selection. It includes requirements for their installation in metering systems and describes how a system produces, or can be made to produce, accurate measurements.
This standard includes recommended operating and maintenance procedures for displacement meter systems.
NOTE: A typical arrangement of a meter station with three displacement meters is given in Appendix A.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 03/06/2016 This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 03/06/2016 |
| Committee | ME-049 |
| Supersedes |
|
