AS 2341.3-1993

Table of Contents

1 -  AS 2341.3-1993 METHODS OF TESTING BITUMEN AND RELATED ROADMAKING PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY BY FLOW THRO
1 -  PREFACE
1 -  METHOD
1 -  1 SCOPE
1 -  2 REFERENCED DOCUMENTS
1 -  3 PRINCIPLE
2 -  4 APPARATUS
2 -  4.1 Viscometer
3 -  4.2 Thermometers
4 -  4.3 Constant temperature bath
4 -  4.4 Timing devices
4 -  4.5 Preheating oven and hot plate
4 -  5 CALIBRATION OF VISCOMETERS
4 -  5.1 Calibration with a calibration fluid
4 -  5.2 Calibration with a reference viscometer
5 -  6 PREPARATION OF THE SAMPLE
5 -  6.1 General
5 -  6.2 Preparation
6 -  7 PROCEDURE
7 -  8 CALCULATION
7 -  8.1 General
7 -  8.2 Calculation of dynamic viscosity from kinematic viscosity
8 -  9 PRECISION
8 -  10 REPORT

Abstract

Sets out procedures for the determination of kinematic viscosity of bituminous materials having kinematic viscosities in the range 2 mm(sup)2(/sup)/s to 300 000 mm(sup)2(/sup)/s.

Scope

This Standard sets out procedures for the determination of kinematic viscosity of bituminous materials having kinematic viscosities in the range 2 mm2/s to 300 000 mm2/s (approximate dynamic viscosities 0.002 Pa.s to 300 Pa.s) using two different types of reverse flow capillary tube viscometers. In particular the method is applicable to residual bitumen for pavements (as specified in AS 2008), cutback bitumen (as specified in AS 2157) and road tar for pavements (as specified in AS 1507).

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
Pages
ISBN
Committee	CH-025
Supersedes	DR 91239 AS 2341.3-1980