AS/NZS 3166:1993 (R2017)
AS/NZS 3166:1993 (R2017)
Approval and test specification - Cables for high voltage luminous discharge tube installations
Standards Australia
Table of Contents
Abstract
Specifies the construction, dimensions and tests for single-core flexible cables for operation at voltages up to and including 7.5 kV to earth, used for the wiring of high voltage luminous discharge tube installations.
RECONFIRMATION NOTICE
Technical Committee EL-003 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 10 October 2016.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 13 December 2016.
The following are represented on Technical Committee EL-003:
Australian Cable Makers' Association
Australian Industry Group
Electrical Compliance Testing Association
Electrical Regulatory Authorities Council
National Electrical and Communications Association
Queensland University of Technology
Scope
This Standard specifies construction, dimensions and tests for single-core flexible cables for operation at voltages up to and including 7.5 kV to earth, used for the wiring of high voltage luminous discharge tube installations. Installation requirements are given in Appendix A.
NOTE: This Standard is intended to apply only to high voltage cables of the types and size which are included. It is not intended, however, that other types or sizes of high voltage cables should be precluded from use, subject to approval by the regulatory authorities.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 20/01/2017. This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 20/01/2017 |
| Committee | EL-003 |
| Supersedes |
|
