AS 1530.1-1994 (R2016)
AS 1530.1-1994 (R2016)
Methods for fire tests on building materials, components and structures Combustibility test for materials
Standards Australia
Table of Contents
Abstract
Sets out a test method for determining the combustibility of building materials and is one of a series of test methods for evaluating the potential fire hazard of building products. This fire test was developed for use by those responsible for selection of construction materials which, although not completely inert, produce only a limited amount of heat and flame when exposed to temperatures of approximately 750°C. This revision aligns the test method more closely with ISO 1182:1990 but specifies combustibility criteria necessary for regulatory purposes.
RECONFIRMATION NOTICE
Technical Committee FP-018 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 18 November 2015.
The following are represented on Technical Committee FP-018:
Australasian Fire and Emergency Service Authorities Council
Australian Building Codes Board
Australian Industry Group
Australian Institute of Building
AWTA Textile Testing
Building Research Association of New Zealand
Bureau of Steel Manufacturers of Australia
CSIRO
Engineers Australia
Fire Protection Association Australia
Fire Protection Association New Zealand
Forest and Wood Products Australia
Insulated Panel Council Australasia
Insulation Australasia
Insurance Council of Australia
Plastics and Chemicals Industries Association
Property Council of Australia
Society of Fire Protection Engineers
Scope
This Standard specifies a test method for the determination of the combustibility of a building material within the criteria given in Clause 3.4.
WARNING: SO THAT SUITABLE PRECAUTIONS ARE TAKEN TO SAFEGUARD HEALTH, THE ATTENTION OF ALL PERSONS CONCERNED IN FIRE TESTS IS DRAWN TO THE POSSIBILITY THAT HARMFUL GASES MAY BE EVOLVED DURING THE COMBUSTION OF TEST SPECIMENS.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 27/05/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 27/05/2016 |
| Committee | FP-018 |
| Supersedes |
|
