AS/NZS 1839:1994

Table of Contents

1 -  AS/NZS 1839:1994 SWIMMING POOLS - PREMOULDED FIBRE-REINFORCED PLASTICS - INSTALLATION
4 -  PREFACE
4 -  CONTENTS
5 -  1 SCOPE
5 -  2 REFERENCED DOCUMENTS
5 -  3 STORAGE, HANDLING AND TRANSPORT OF POOLS
6 -  4 INSTALLATION CRITERIA
6 -  4.1 Condition of the pool at the point of delivery
6 -  4.2 Imposed loads
6 -  4.3 Bottom load
6 -  4.4 Movement of sub-surface water
6 -  5 MATERIALS
6 -  5.1 Bedding
6 -  5.2 Backfill
6 -  6 EXCAVATION FOR POOLS IN THE GROUND
6 -  6.1 Support during excavation
6 -  6.2 Excavation profile
7 -  7 INSTALLATION OF POOLS IN THE GROUND
7 -  7.1 Deflection limits
7 -  7.2 Pool drainage
8 -  7.3 Site work
8 -  7.4 Placement and backfilling of pool
8 -  7.5 Final level of pool
8 -  7.6 Concrete bond beam
8 -  8 INSTALLATION OF POOLS ABOVE THE GROUND
8 -  8.1 General
9 -  8.2 Base preparation
9 -  8.3 Bedding
9 -  8.4 Final level of pool
9 -  9 POOL-ASSOCIATED SERVICES
9 -  9.1 Electrical connections
9 -  9.2 Plumbing
9 -  9.3 Skimmer boxes
9 -  9.4 Fencing (for New Zealand application only)
9 -  10 OPERATING INSTRUCTIONS

Abstract

Sets out procedures for the installation of premoulded fibre-reinforced plastic swimming pools complying with the requirements of AS/NZS 1838:1994, for above and below ground locations.

Scope

This Standard sets out procedures for the installation of premoulded fibre-reinforced plastics (FRP) swimming pools complying with the requirements of AS/NZS 1838.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
Pages
ISBN
Committee	PL-041
Supersedes	AS 1839-1989 DR 93283