Methods for the analysis of iron and steel Determination of tin content - Flame atomic absorption spectrometric method
Standards Australia
Specifies a flame atomic absorption spectrometric method for the determination of tin content of iron and steel. The sample is digested in acid, the tin extracted into trioctyl phosphine oxide in 4-methylpentan-2-one (MIBK) and then aspirated into a nitrous oxide/acetylene flame of an atomic absorption spectrometer. The absorption is measured at 235.5 nm.
RECONFIRMATION NOTICE
Technical Committee CH-010 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 31 July 2016.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 4 November 2016.
The following are represented on Technical Committee CH-010:
Australian Aluminium Council
Bureau of Steel Manufacturers of Australia
International Copper Association Australia
International Precious Metals Institute
National Association of Testing Authorities Australia
This Standard specifies a flame atomic absorption spectrometric method for the determination of tin in iron and steel. The method is applicable to all types of iron and steel containing tin in the concentration range 0.002% to 0.10%.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 16/12/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 16/12/2016 |
| Committee | CH-010 |
| Supersedes |
|
