Textile floor coverings - Tests and measurements Determination of thickness loss after brief, moderate static loading
Standards Australia
RECONFIRMATION NOTICE
Technical Committee TX-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 8 January 2016.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 18 May 2016.
The following are represented on Technical Committee TX-009:
Australian Chamber of Commerce and Industry
AWTA Textile Testing
Building and Construction Industry Training Organisation (New Zealand)
Carpet Institute of Australia
Carpet Institute of Australia (Australian Carpet Classification)
Council of Textile and Fashion Industries of Australia
CSIRO
Floorcovering Association of NSW
Floorcovering Association of Victoria
Individual Cleaners Association of Australia and New Zealand
New Zealand Wool Testing Authority
RMIT University
Specialised Cleaning and Restoration Industry Association
This International Standard specifies a method for the determination of thickness loss of textile floor coverings after brief, moderate static loading, and is intended to simulate the effect of the pressure exerted by a chair leg for a short period. It is applicable to all textile floor coverings of uniform thickness and construction. It does not apply to other textile floor coverings unless the areas of different thickness or construction can be separately tested.
NOTE - A method for determination of thickness loss of textile floor coverings after prolonged, heavy static loading is given separately in ISO 3416.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 10/06/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 10/06/2016 |
| Committee | TX-009 |
| Supersedes |
|
