AS 2076-1996 (R2014)

Table of Contents

1 -  AS 2076-1996 WIRE-ROPE GRIPS FOR NON-LIFTING APPLICATIONS
4 -  PREFACE
5 -  CONTENTS
6 -  1 SCOPE
6 -  2 REFERENCED DOCUMENTS
6 -  3 DEFINITIONS
6 -  3.1 Bridge
6 -  3.2 Clip
6 -  3.3 Double-throat grip
6 -  3.4 Fist grip
7 -  3.5 Shall
7 -  3.6 Should
7 -  3.7 Wire-rope grip
7 -  4 MATERIALS
7 -  4.1 Bridge
7 -  4.2 Bolt
7 -  5 NOMINAL SIZE
7 -  6 DESIGN AND MANUFACTURE
7 -  6.1 Forming
7 -  6.2 Dimensions
8 -  7 MECHANICAL PROPERTIES
9 -  8 MARKING AND INSTRUCTIONS
9 -  8.1 Marking
9 -  8.2 Instructions
9 -  9 TESTING OF MECHANICAL PROPERTIES
10 -  10 CARE AND USE OF WIRE-ROPE GRIPS
10 -  10.1 Inspection
10 -  10.2 Use
10 -  10.3 Live running ropes
10 -  10.4 Rope lengthening
10 -  10.5 Method of application
13 -  APPENDIX A - INFORMATION THAT SHOULD BE SUPPLIED WITH ENQUIRIES AND ORDERS
14 -  APPENDIX B - STANDARDS FOR COMPONENTS THAT ARE USED IN LIFTING SYSTEMS
15 -  APPENDIX C - TYPICAL DIMENSIONS OF WIRE-ROPE GRIPS
18 -  APPENDIX D - CONDITIONS FOR APPLICATION OF TEST FORCES
19 -  APPENDIX E - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
19 -  E1 SCOPE
19 -  E2 STATISTICAL SAMPLING
19 -  E3 PRODUCT CERTIFICATION
19 -  E4 SUPPLIER’S QUALITY SYSTEM
20 -  E5 OTHER MEANS OF ASSESSMENT

Abstract

Specifies requirements for wire-rope grips for non-lifting applications that are used with steel-wire ropes having a diameter of not less than 8 mm. Information that should be supplied with enquiries and orders is given in an appendix.

RECONFIRMATION NOTICE
Technical Committee ME-025 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 17 January 2014.
The following are represented on Technical Committee ME-025:

Australian Chamber of Commerce and Industry
Australian Diecasting Association
Australian Industry Group
Australian Maritime Safety Authority
Crane Industry Council of Australia
Engineers Australia
Independent Chairperson
National Association of Testing Authorities Australia
NSW Department of Trade and Investment, Regional Infrastructure and Services
The Institute of Quarrying Australia
WorkCover New South Wales
WorkSafe Victoria

Scope

This Standard specifies requirements for wire-rope grips for non-lifting applications that are used with steel-wire ropes having a diameter of not less than 8 mm.

NOTES:
1 Guidance on information that should be supplied with enquiries and orders is given in Appendix A.
2 Standards for components that are used in lifting systems are listed in Appendix B.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 30/01/2014. This standard has been reconfirmed in Australia in 2014 and remains current in New Zealand. Reconfirmation Notice 30/01/2014
Pages
ISBN
Committee	ME-025
Supersedes	AS 2076-1977 DR 95075