AS/NZS 2119:1997 (R2016)

Table of Contents

Abstract

Specifies sampling procedures to be used when testing carpets and other types of textile floor coverings. It is identical with and reproduced from ISO 1957:1986.
RECONFIRMATION NOTICE
Technical Committee TX-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 8 January 2016.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 18 May 2016.
The following are represented on Technical Committee TX-009:
Australian Chamber of Commerce and Industry
AWTA Textile Testing
Building and Construction Industry Training Organisation (New Zealand)
Carpet Institute of Australia
Carpet Institute of Australia (Australian Carpet Classification)
Council of Textile and Fashion Industries of Australia
CSIRO
Floorcovering Association of NSW
Floorcovering Association of Victoria
Individual Cleaners Association of Australia and New Zealand
New Zealand Wool Testing Authority
RMIT University
Specialised Cleaning and Restoration Industry Association

Scope

This International Standard specifies a procedure to be followed when samples are taken either from a bulk supply of machine-made textile floor coverings or from specially produced material, and when specimens are cut from these samples if such specimens are to be used for physical tests.
It is accepted that the sample taken may not necessarily be completely representative of the bulk. It is recommended that the method of sampling be previously agreed by the parties interested in the results of the test.
The procedure is applicable to machine-made textile floor coverings with or without pile.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 10/06/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 10/06/2016
Pages
ISBN
Committee	TX-009
Supersedes	AS 2119-1978 DR 97097 CP