AS/NZS 2341.13:1997 (R2013)

Methods of testing bitumen and related roadmaking products Long-term exposure to heat and air

Standards Australia

More info

1 - AS/NZS 2341.13:1997 METHODS OF TESTING BITUMEN AND RELATED ROADMAKING PRODUCTS - LONG-TERM EXPOSURE TO HEAT AND AIR
1 - 1 SCOPE
1 - 2 REFERENCED DOCUMENTS
1 - 3 APPLICATION
2 - 4 PRINCIPLE
2 - 5 MATERIALS
2 - 6 APPARATUS
2 - 6.1 Air supply
2 - 6.2 Flowmeter
2 - 6.3 Heating and mixing assembly
2 - 6.4 Oven
6 - 6.5 Oven monitoring thermometer
6 - 6.6 Sample bottles
6 - 6.7 Sliding plate microviscometer
6 - 7 SETTING THE OVEN TEMPERATURE
7 - 8 PROCEDURE
7 - 8.1 Cleaning the sample bottles
7 - 8.2 Deposition of the bitumen film on the walls of the sample bottles
8 - 8.3 Exposure of the bitumen film
8 - 8.4 Recovery and mixing of the exposed bitumen
8 - 8.5 Measurement of the apparent viscosity after treatment
8 - 9 CALCULATION AND EXPRESSION OF RESULTS
11 - 10 REPORT
12 - 11 PRECISION
13 - APPENDIX A - METHOD FOR SETTING THE OVEN TEMPERATURE- PLATINUM RESISTANCE THERMOMETER PROBE
13 - A1 SCOPE
13 - A2 APPARATUS
13 - A2.1 Platinum resistance thermometer probe
14 - A2.2 Resistance bridge
14 - A3 PROCEDURE
16 - APPENDIX B - METHOD FOR SETTING THE OVEN TEMPERATURE- MERCURY-IN-GLASS THERMOMETER
16 - B1 SCOPE
16 - B2 APPARATUS
16 - B2.1 Calibrating thermometer (IP 32C)
16 - B2.2 Sample bottle
16 - B3 PROCEDURE

Abstract

RECONFIRMATION NOTICE
Technical Committee CH-025 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 14 May 2013.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 20 May 2013.
The following are represented on Technical Committee CH-025:

Australian Road Research Board (ARRB)
Australian Asphalt Pavement Association
Australian Chamber of Commerce and Industry
Australian Institute of Petroleum
AUSTROADS
Engineers Australia
National Association of Testing Authorities Australia
Roading New Zealand
Transit New Zealand

To view or download a copy of the reconfirmation notice please go to the reconfirmation link near the top of this page.

Scope

SCOPE This Standard sets out a method based on the accelerated aging of bitumen to determine the time required for bitumen to reach a viscosity level associated with distress in pavement surfacings.
NOTES:
1 The results of the test may be used to predict likely resistance to hardening of a bitumen in sprayed surfacings and in thin asphalt surfacings which are permeable to air.
2 The method takes too long to be used for 'day-to-day' quality control and is intended for occasional checking of quality, particularly where there has been a change in refinery crude feedstock or processing.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 30-07-2013
Pages
ISBN
Committee	CH-025
Supersedes	DR 95360 AS 2341.13-1986