AS 4156.2.2-1998 (R2013)

Table of Contents

1 -  AS 4156.2.2-1998 COAL PREPARATION - HIGHER RANK COAL - FROTH FLOTATION - SEQUENTIAL PROCEDURE
4 -  PREFACE
4 -  CONTENTS
5 -  FOREWORD
6 -  1 SCOPE
6 -  2 REFERENCED DOCUMENTS
6 -  3 DEFINITIONS
6 -  3.1 Higher rank coal (as defined in AS 2096)
6 -  4 PRINCIPLE
7 -  5 SAMPLE
7 -  6 APPARATUS
7 -  7 FLOTATION CONDITIONS
7 -  7.1 Collector dosage
7 -  7.2 Frother dosage
7 -  7.3 Solids content
7 -  8 PROCEDURE
7 -  8.1 Initial procedure
7 -  8.2 Initial separation
8 -  8.3 Subsequent separations
8 -  8.4 Analysis of concentrate and tailings
8 -  9 CALCULATION OF RESULTS
9 -  10 REPORTING OF RESULTS
10 -  APPENDIX A - WORKED EXAMPLE OF CALCULATION OF RESULTS
10 -  A1 SCOPE
10 -  A2 PROCEDURE
11 -  A3 TEST RESULTS
12 -  A4 CALCULATIONS
14 -  APPENDIX B - PRESENTATION OF RESULTS
14 -  B1 TABULATED DATA
14 -  B2 GRAPHICAL PRESENTATION

Abstract

Sets out a laboratory sequential procedure for the froth flotation testing of fine coal. It provides a means of evaluating for a coal the flotation characteristics that may be expected from the froth flotation process.

RECONFIRMATION NOTICE
Technical Committee MN-001 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 15 July 2013.
The following are represented on Technical Committee MN-001:

Australasian Institute of Mining and Metallurgy
Australian Coal Association
Australian Coal Industry Reference Samples
Australian Coal Preparation Society
Bureau of Steel Manufacturers of Australia
Coalfield Geology Council of NSW
CSIRO Energy Technology
National Association of Testing Authorities Australia
National Generators Forum
The University of New South Wales
The University of Queensland
University of Newcastle


To view or download a copy of the reconfirmation notice please go to the reconfirmation link near the top of this page.

Scope

This Standard sets out a laboratory sequential procedure for the froth flotation testing of fine coal, e.g. coal having a particle size of less than 0.5 mm. The procedure provides a means of evaluating for a coal the flotation characteristics (expressed as a yield-ash relationship) that may be expected from the froth flotation process.

Pulp samples that cannot be dewatered without the use of heat or chemical additives are not covered by this Standard; nor does it cover procedures for the investigation of flotation kinetics.

The test is not intended to provide plant design data.

This Standard should be read in conjunction with AS 4156.2.1.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 19-08-2013
Pages
ISBN
Committee	MN-001
Supersedes	AS 4156.2.2-1994 DR 97517