Paints for steel structures Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed steel
Standards Australia
Specifies requirements for waterborne primers and paints intended to be used on primed or unprimed galvanized steel, zinc/aluminium alloy-coated steel and on zinc-primed steel in exterior industrial or marine applications when applied by brush, roller or spraying.
RECONFIRMATION NOTICE
Technical Committee CH-003 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 30 May 2013.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 26August 2013.
The following are represented on Technical Committee CH-003:
Australasian Corrosion Association
Australian Paint Approval Scheme
Australian Paint Manufactures' Federation
Australian Pipeline Industry Association
Institution of Professional Engineers New Zealand
Master Painters New Zealand Association
Water Corporation Western Australia
This Standard specifies requirements for waterborne primers and paints, intended to be used on primed or unprimed galvanized steel, on zinc/aluminium alloy-coated steel and on zinc-primed steel in exterior, industrial or marine applications when applied by brush, roller or spraying.
Type 11 and Type 21 paints, as described in AS/NZS 2312, comply with the requirements of this Standard. Type 21 paint may be produced in a range of colours and may be pigmented with micaceous iron oxide (MIO).
NOTES:
1 When used with the appropriate primer, paint classed as Type 21 will comply with the requirements for paint systems LP4 - A, MP2 - A, MP2 - B, MP2 - C, MP2 - D, MSALP - B, MSZLP - B, GZLP - A and GZLP - B described in AS/NZS 2312.
2 Some Type 21 paints may also be used as a primer for system GZLP - A while Type 11 paint may be used as a primer for system GZLP - B of AS/NZS 2312.
3 Type 21 paint may be supplied in any of the following gloss levels as defined in AS/NZS 2310 - gloss, semi-gloss, low gloss or flat.
4 Appendix A provides recommendations on information which should be provided by the purchaser at the time of enquiry or order.
5 Additional information on the use and application of waterborne paints is contained in Appendix B.
6 Alternative means for demonstrating of compliance with this Standard are given in Appendix C.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmation Notice 16-09-2013 |
| Committee | CH-003 |
| Supersedes |
|
