AS 2848.1-1998 (R2018)

Table of Contents

1 -  AS 2848.1-1998 ALUMINIUM AND ALUMINIUM ALLOYS-COMPOSITIONS AND DESIGNATIONS - WROUGHT PRODUCTS
4 -  PREFACE
4 -  CONTENTS
5 -  SECTION 1 SCOPE AND GENERAL
5 -  1.1 SCOPE
5 -  1.2 DEFINITIONS
5 -  1.2.1 Annealing
5 -  1.2.2 Artificial ageing
5 -  1.2.3 Cold working
5 -  1.2.4 Natural ageing
5 -  1.2.5 Partial annealing
5 -  1.2.6 Quenching
5 -  1.2.7 Solution heat treatment
5 -  1.2.8 Stabilizing
5 -  1.2.9 Strain hardening
5 -  1.2.10 Temper
6 -  SECTION 2 ALLOY DESIGNATION
6 -  2.1 SCOPE
6 -  2.2 DESIGNATION SYSTEM
6 -  2.2.1 General
6 -  2.2.2 Aluminium and aluminium alloy groups
6 -  2.2.3 IXXX group
6 -  2.2.4 2XXX to 8XXX groups
6 -  2.2.5 Modification of original alloys
7 -  2.3 CHEMICAL COMPOSITION
7 -  2.3.1 General
7 -  2.3.2 Standard limits
7 -  2.3.3 Conformance with standard limits
8 -  2.3.4 Aluminium content
8 -  2.3.5 Unnamed elements
12 -  SECTION 3 TEMPER DESIGNATION
12 -  3.1 SCOPE
12 -  3.2 DESIGNATION SYSTEM
12 -  3.3 BASIC TEMPER DESIGNATIONS
12 -  3.4 STRAIN-HARDENED TEMPERS (H)
12 -  3.4.1 General
12 -  3.4.2 First digit
13 -  3.4.3 Second digit
13 -  3.4.4 Third digit
14 -  3.5 THERMALLY TREATED TEMPERS (T)
14 -  3.5.1 General
14 -  3.5.2 First digit
15 -  3.5.3 Additional digits

Abstract

Sets out designation systems to identify grades of wrought aluminium and aluminium alloys and their tempers. Full chemical compositions are included for wrought grades currently available in Australia.
RECONFIRMATION NOTICE
Major stakeholders of this publication have reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 29 August 2018.

Scope

This Standard provides a listing of wrought aluminium and aluminium alloys currently available in Australia and defines the temper designation system for aluminium and aluminium alloys that have been strain hardened, with or without supplementary thermal treatments, or thermally treated, with or without supplementary strain-hardening. This Standard specifies chemical composition limits for all designated grades. Requirements for other properties are specified in Standards that cover product types.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 14/09/2018. This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 14/09/2018
Pages
ISBN
Committee	MT-003
Under Revision	DR 06541
Supersedes	AS 2848.1-1986 DR 97568