AS/NZS 4543.1:1999

Table of Contents

1 -  AS/NZS 4543.1:1999 PROTECTIVE DEVICES AGAINST DIAGNOSTIC MEDICAL X-RADIATION - DETERMINATION OF ATTENUATION PROPERTIES OF MATERI
4 -  PREFACE
5 -  CONTENTS
7 -  1 Scope and object
7 -  1.1 Scope
7 -  1.2 Object
7 -  2 Normative reference
8 -  3 Terminology
8 -  3.1 Degree of requirements
8 -  3.2 Use of terms
8 -  4 Procedure
8 -  5 Measurement of quantities
8 -  5.1 RADIATION QUANTITIES
9 -  5.2 Geometrical quantities
10 -  5.3 Measuring arrangement in the BROAD BEAM
11 -  5.4 Measuring arrangement in the NARROW BEAM
11 -  5.5 Position of the RADIATION DETECTOR
11 -  5.6 Test instrumentation
11 -  5.7 Test object
12 -  6 Determination of ATTENUATION properties
12 -  6.1 ATTENUATION RATIO
12 -  6.2 BUILD UP FACTOR
13 -  6.3 ATTENUATION EQUIVALENT
13 -  6.4 LEAD EQUIVALENT
13 -  6.5 Homogeneity
14 -  7 Statement of compliance
17 -  Annex A - Index of defined terms

Abstract

Specifies the methods of determining and indicating the attenuation properties of protective devices against X-radiation. This Standard is identical with and has been reproduced from IEC 61331-1:1994.

Scope

This part of International Standard IEC 1331 applies to materials in sheet form used for the manufacturing of PROTECTIVE DEVICES against X-RADIATION of RADIATION QUALITIES generated with X-RAY TUBE VOLTAGES up to 400 kV and a TOTAL FILTRATION of up to 3,5 mm Cu.

This part 1 is not intended to be applied to PROTECTIVE DEVICES when these are to be checked for the presence of their ATTENUATION properties before and after periods of use.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
Pages
ISBN
Committee	HE-003
Supersedes	DR 95390