Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate - Weighing-in-water method
Standards Australia
<toc />
RECONFIRMATION NOTICE
Technical Committee CE-012 has reviewed the content of this publication and in
accordance with Standards Australia procedures for reconfirmation, it has been
determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the
original date of publication. Users are advised to ensure that they are using the latest
versions of such documents as appropriate, unless advised otherwise in this
Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for
reconfirmation on 29 March 2016.
The following are represented on Technical Committee CE-012:
ARRB Group Ltd - Australian Road Research Board
Australasian (iron & steel) Slag Association
Australasian Procurement and Construction Council
Australian Asphalt Pavement Association
Australian Geomechanics Society
AUSTROADS
Bureau of Steel Manufacturers of Australia
Cement Concrete & Aggregates Australia – Aggregates
Cement Concrete & Aggregates Australia – Cement
Cement Concrete & Aggregates Australia – Concrete
Engineering & Construction Laboratories Association
National Association of Testing Authorities Australia
Rail Industry Safety and Standards Board
The Institute of Quarrying Australia
This Standard sets out the method for determining the particle density, apparent particle density and water absorption of aggregates substantially retained on a 4.75 mm sieve, by weighing in water.
NOTE: An aggregate containing more than 10% of material passing a 4.75 mm test sieve is regarded as a mixed aggregate. A mixed aggregate is separated into two fractions consisting of material retained on and material passing a 4.75 mm sieve. The density of the fine fractions is determined separately by the method of AS 1141.5. The density of the mixed aggregate is calculated as a weighted average as illustrated in Clause 7(f).
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 15/07/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 15/07/2016 |
| Committee | CE-012 |
| Supersedes |
|
