AS/NZS 60695.2.13:2001
AS/NZS 60695.2.13:2001
Fire hazard testing Glowing/hot wire based test methods - Glow-wire ignitability test method for materials
Standards Australia
Table of Contents
Abstract
Specifies the details of the glow-wire test when applied to specimens of solid insulating materials or other solid combustible materials for ignitability testing. Identical to and reproduced from IEC 60695-2-13:2000.
Scope
This part of IEC 60695 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWIT).
The test results make it possible to provide a relative comparison of various materials according to the temperature at which the test specimen ignites during the application of the electrically heated glow-wire used as an ignition source.
The test method is not valid for determining the ignition behaviour of complete items of equipment, since the dimensions of the insulating systems or combustible parts, the design and heat transfer to adjacent metallic or non-metallic parts, etc., greatly influence the ignitability of the materials used therein. In addition to this, it is not valid for determining fire behaviour and fire hazard of equipment.
One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| Committee | EL-002 |
| Supersedes |
|
