AS/ACIF S031:2001

Table of Contents

1 -  AS/ACIF S031:2001 REQUIREMENTS FOR ISDN BASIC ACCESS INTERFACE
3 -  FOREWORD
5 -  TABLE OF CONTENTS
7 -  PARTICIPANTS
9 -  1 INTERPRETATION
9 -  1.1 Categories of requirements
9 -  1.2 Compliance statements
9 -  1.3 Definitions, expressions and terms
9 -  1.4 Notes
9 -  1.5 References
9 -  1.6 Units and symbols
11 -  2 SCOPE
13 -  3 REFERENCES
17 -  4 ABBREVIATIONS AND DEFINITIONS
17 -  4.1 Abbreviations
17 -  4.2 Definitions
17 -  4.2.1 Customer Equipment (CE)
17 -  4.2.2 Data Link Layer (Layer 2)
17 -  4.2.3 Facility
18 -  4.2.4 Integrated Services Digital Network (ISDN)
18 -  4.2.5 Network Layer (Layer 3)
18 -  4.2.6 Physical Layer (Layer 1)
18 -  4.2.7 Telecommunications Network
19 -  5 REQUIREMENTS
19 -  5.1 General
19 -  5.1.1 Fail-safe operation
19 -  5.1.2 Emergency services access
20 -  5.2 Physical Layer (Layer 1)
20 -  5.2.1 General
20 -  5.2.2 Variations or additions
20 -  5.3 Data Link Layer (Layer 2)
20 -  5.3.1 General
20 -  5.3.2 ITAAB Advisory Notes
21 -  5.4 Network Layer (Layer 3)
21 -  5.4.1 General
21 -  5.4.2 Variation/additional requirements
23 -  5.5 Additional requirements for CE intended for connection to an AUSTEL TS 013 based ISDN BA Interface
23 -  5.5.1 General
23 -  5.5.2 Requirements
27 -  6 TESTING
27 -  6.1 General
27 -  6.2 Standard test conditions
27 -  6.3 Fail-safe operation
27 -  6.4 Emergency calling
27 -  6.5 Physical Layer (Layer 1)
27 -  6.5.1 General
28 -  6.5.2 Variation/additional tests
28 -  6.6 Data Link Layer (Layer 2)
28 -  6.7 Network Layer (Layer 3)
28 -  6.7.1 General
28 -  6.7.2 Variation/additional tests
29 -  6.8 Demonstration of compliance for CE intended for connection to an AUSTEL TS 013 based ISDN BA Interface
29 -  6.8.1 Item 1: Sending Complete IE
29 -  6.8.2 Item 2: Progress Indicator IE
30 -  6.8.3 Item 3: Bearer Capacity IE
30 -  6.8.4 Item 4: Cause IE
30 -  6.8.5 Item 5: Cause IE Octet 3a
30 -  6.8.6 Item 6: AUSTEL TS 013 cause values
30 -  6.8.7 Item 7: High Layer Compatibility IE Octet 4a
30 -  6.8.8 Item 8: Modem codepoints
30 -  6.8.9 Item 9: Called Party Number IE (Number Plan)
30 -  6.8.10 Item 10: Calling Party Number IE (Number Plan)
30 -  6.8.11 Item 12: Broadcast SETUP Message
30 -  6.8.12 Item 13: Multiple diagnostics
31 -  6.8.13 Item 14: Length of Cause IE
31 -  6.8.14 Item 15: CLIR
31 -  6.8.15 Item 16: ETSI supplementary service requests

Abstract

Specifies the technical conditions and performance requirements for certain Customer Equipment (CE) at the Physical, Data Link and Network Layers (Layers 1, 2 and 3) when connected to an Integrated Services Digital Network (ISDN) Basic Access interface at the S/T reference point.

Scope

2.1 This Standard specifies the technical conditions and performance requirements for certain Customer Equipment (CE) at the Physical, Data Link and Network Layers (Layers 1, 2 and 3) when connected to an Integrated Services Digital Network (ISDN) Basic Access interface at the S/T reference point.
2.2 The equipment covered by this Standard is all CE that is intended for connection to an Integrated Services Digital Network (ISDN) Basic Access for the purpose of receiving information from, or transmitting information to, the ISDN.
2.3 This Standard applies to the following types of ISDN:
(a) ETSI Standards based ISDN Basic Access.
(b) AUSTEL Technical Standard 013 [1][2] based ISDN Basic Access.
2.4 CE is not excluded from the scope of this Standard by reason only that it is capable of performing functions additional to those listed above.
2.5 For additional technical requirements applying to a CE, this Standard should be read in conjunction with those ACA Technical Standards and other documents listed in Clause 3: REFERENCES of this Standard.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
Pages
ISBN
Committee	CT-098
Supersedes	AS/ACIF S031:1999 ACA TS 031-1997