AS/NZS 4867.1:2002
AS/NZS 4867.1:2002
Cigarette lighters General requirements
Standards Australia
Table of Contents
1 Scope
2 Definitions
3 Functional requirements
3.1 Flame generation
3.2 Flame heights
3.3 Flame-height adjustment
3.4 Resistance to spitting or sputtering and flaring
3.5 Flame extinction
3.6 Volumetric displacement
4 Structural integrity requirements
4.1 External finish
4.2 Compatibility with fuel
4.3 Resistance to fuel loss
4.4 Resistance to dropping
4.5 Resistance to elevated temperature
4.6 Resistance to internal pressure
4.7 Burning behaviour
4.8 Resistance to cyclic burning
4.9 Resistance to continuous burning
5 Test methods
5.1 Specimens
5.2 Flame height measurement
5.3 Spitting, sputtering and flaring test
5.4 Flame extinction test
5.5 Fuel compatibility test
5.6 Refilling test
5.7 Fuel volumetric displacement test
5.8 Drop test
5.9 Elevated temperature test
5.10 Internal pressure test
5.11 Cyclic burning-time test
5.12 Continuous burning-time test
6 Instructions and warnings
6.1 Location
6.2 Content
6.3 Refilling instructions
7 Product marking
Annexes
A - Manufacturer's acceptable quality levels for
specifications and inset limits for flame
characteristics in 3.2.1 and 3.2.2
B - Bibliography
Abstract
Provides requirements for cigarette lighters that ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse, in order to reduce potential hazards to users. This Standard is identical with and has been reproduced from ISO 9994:1995.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| Committee | CS-024 |
| Supersedes |
|
