AS 1774.10-2002 (R2013)

Table of Contents

1 -  AS 1774.10-2002 REFRACTORIES AND REFRACTORY MATERIALS-PHYSICAL TEST METHODS - PYROMETRIC CONE EQUIVALENT (REFRACTORINESS)
1 -  PREFACE
3 -  1 Scope and field of application
3 -  2 References
3 -  3 Definitions
3 -  3.1 refractoriness
3 -  3.2 pyrometric reference cone
3 -  3.3 reference temperature; temperature of collapse
3 -  4 Principle
3 -  5 Apparatus
3 -  5.1 Furnace
4 -  5.2 Pyrometric reference cones
4 -  5.3 Stand for the pyrometric reference cones and the test pieces
4 -  6 Test pieces
4 -  6.1 Sampling
4 -  6.2 Size and shape
4 -  6.3 Preparation of test pieces
4 -  6.3.1 General
4 -  6.3.2 Cut test pieces
4 -  6.3.3 Moulded test pieces
5 -  7 Selection of pyrometric reference cones
5 -  8 Preparation of test stand
6 -  9 Procedure
6 -  10 Reporting of results
7 -  Annex - Typical mould for moulded test pieces

Abstract

Sets out a method for the preparation of a test specimen of a refractory material and the determination of its pyrometric cone equivalent (refractoriness). This Standard is identical with and has been reproduced from ISO 528:1983.

RECONFIRMATION NOTICE
Technical Committee MN-007 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 4 April 2013.
The following are represented on Technical Committee MN-007:

Australasian Institute of Mining and Metallurgy
Australian Ceramic Society
Bureau of Steel Manufacturers of Australia
Cement Industry Federation
CSIRO Manufacturing & Materials Technology
Institute of Refractories Engineers
Refractories Manufacturers Association of Australia
The University of New South Wales


To view or download a copy of the reconfirmation notice please go to the reconfirmation link near the top of this page.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 16-07-2013
Pages
ISBN
Committee	MN-007
Supersedes	DR 01329 CP AS 1774.10-1994