AS/NZS 1301.201s:2002 (R2013)
AS/NZS 1301.201s:2002 (R2013)
Methods of test for pulp and paper Kappa number of pulp
Standards Australia
Abstract
RECONFIRMATION NOTICE
Technical Committee PK-019 has reviewed the content of this publication and in
accordance with Standards Australia procedures for reconfirmation, it has been determined
that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original
date of publication. Users are advised to ensure that they are using the latest versions of
such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for
reconfirmation on 13 September 2013.
The following are represented on Technical Committee PK-019:
Appita
Australian Forest Products Association
Australian Institute of Packaging
HRL Technology
Scope
This method provides an indirect measure of the relative bleachability, or residual lignin content of pulp. It may be used for all types and grades of chemical and semi-chemical unbleached and semi-bleached wood pulps obtained in yields under 60%. The method may also be used as a laboratory control technique for well screened pulps obtained in higher yields up to 70%. It should be noted that reproducibility is less for high yield pulps than for low yield pulps.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | This standard has been reconfirmed in Australia in 2013 and remains current in New Zealand. Reconfirmation Notice 29-11-2013 |
| Committee | PK-019 |
| Supersedes |
|
