Silver and silver bearing alloys Determination of silver content (0.1% to 99.9%) - Tritrimetric (potentiometric) method
Standards Australia
Sets out a titrimetric procedure for the determination of silver content and silver bearing alloys. This method is applicable to alloys containing 0.1% to 99.9% silver. Total of gold and platinum group metals must be less than 20%.
RECONFIRMATION NOTICE
Technical Committee CH-010 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 22 November 2016.
The following are represented on Technical Committee CH-010:
International Copper Association Australia
Australian Aluminium Council
International Precious Metals Institute
National Association of Testing Authorities Australia
Bureau of Steel Manufacturers of Australia
This Standard sets out a titrimetric procedure for the determination of silver content in silver and silver bearing alloys. This method is applicable to alloys containing 0.1% to 99.9% silver. Total of gold and platinum group metals must be less than 20%. Mercury and lead should be absent. If palladium or tungsten are present they need to be complexed.
NOTES:
1 Recommended methods of sampling dore bullion for use with this Standard are provided in Appendix A.
2 The presence of the following elements may cause difficulties in obtaining a homogeneous sample: iron, antimony, arsenic or nickel.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 09/12/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 09/12/2016 |
| Committee | CH-010 |
| Under Revision |
|
| Supersedes |
|
| Superseded By |
|
