AS 3899-2002 (R2013)

Table of Contents

1 -  AS 3899-2002 HIGHER RANK COAL AND COKE-BULK DENSITY
4 -  PREFACE
5 -  CONTENTS
6 -  FOREWORD
7 -  1 SCOPE
7 -  2 REFERENCED DOCUMENTS
7 -  3 DEFINITIONS
7 -  3.1 Bulk density of higher rank coal
7 -  3.2 Bulk density of coke
7 -  4 DETERMINATION OF BULK DENSITY OF HIGHER RANK COAL
7 -  4.1 General
8 -  4.2 Uncompacted box method
8 -  4.2.1 Principle
8 -  4.2.2 Samples
8 -  4.2.3 Apparatus
9 -  4.2.4 Procedure
9 -  4.3 Measuring cylinder method
9 -  4.3.1 Principle
9 -  4.3.2 Sample
9 -  4.3.3 Apparatus
10 -  4.3.4 Procedure
12 -  5 DETERMINATION OF BULK DENSITY OF COKE
12 -  5.1 General
12 -  5.2 Principle
12 -  5.3 Samples
12 -  5.3.1 Types of samples
12 -  5.3.2 For special determinations
13 -  5.4 Apparatus
13 -  5.5 Procedure
13 -  6 CALCULATION OF RESULTS
13 -  6.1 Coal
13 -  6.1.1 Uncompacted box method
14 -  6.1.2 Measuring cylinder method
14 -  6.2 Coke
14 -  7 ACCEPTANCE OF RESULTS
14 -  8 REPORTING OF RESULTS
14 -  9 PRECISION
14 -  9.1 Repeatability
15 -  9.2 Reproducibility
15 -  10 TEST REPORT

Abstract

Provides three methods for the determination of the bulk density of crushed higher rank coal and coke.

RECONFIRMATION NOTICE
Technical Committee MN-001 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 15 July 2013.
The following are represented on Technical Committee MN-001:

Australasian Institute of Mining and Metallurgy
Australian Coal Association
Australian Coal Industry Reference Samples
Australian Coal Preparation Society
Bureau of Steel Manufacturers of Australia
Coalfield Geology Council of NSW
CSIRO Energy Technology
National Association of Testing Authorities Australia
National Generators Forum
The University of New South Wales
The University of Queensland
University of Newcastle


To view or download a copy of the reconfirmation notice please go to the reconfirmation link near the top of this page.

Scope

This Standard sets out the following three methods for the determination of the bulk density of crushed higher rank coal and coke: (a) Uncompacted box method, for coal less than 45 mm nominal top size (see Note to Clause 4.2.3(a)).
(b) Measuring cylinder method, for coal typically less than 63 mm as used in pulverized fuel fired boilers and cement kilns.
(c) Uncompacted box method for coke.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 19-08-2013
Pages
ISBN
Committee	MN-001
Supersedes	AS 3899-1991 DR 02333 CP