AS/NZS 4783.2:2002 (R2013)

Table of Contents

1 -  AS/NZS 4783.2:2002 PERFORMANCE OF ELECTRICAL LIGHTING EQUIPMENT- BALLASTS FOR FLUORESCENT LAMPS - ENERGY LABELLING AND...
4 -  PREFACE
5 -  CONTENTS
6 -  FOREWORD
7 -  1 SCOPE
7 -  2 APPLICATION
7 -  3 REFERENCED DOCUMENTS
8 -  4 DEFINITIONS
8 -  4.1 Energy efficiency index (EEI) classification
8 -  4.2 Minimum energy performance standards (MEPS)
8 -  4.3 Supplier
8 -  4.4 Total input power
8 -  4.5 Corrected total input power
8 -  5 ENERGY EFFICIENCY INDEX (EEI) CLASSIFICATION AND LABELLING
8 -  5.1 Determination of corrected total input power (Ptot.cor.)
8 -  5.1.1 Number of samples
9 -  5.1.2 Determination of ballast efficiency
10 -  5.2 Determination of average corrected total input power
10 -  5.3 Determination of EEI classification
10 -  5.3.1 Classification tables
10 -  5.3.2 Additional requirements for A1 classification
10 -  5.4 Labelling of EEI
10 -  5.4.1 Australia
10 -  5.4.2 New Zealand
10 -  6 PERFORMANCE REQUIREMENTS
10 -  6.1 General
11 -  6.2 Performance prerequisites
11 -  6.3 BLF declaration
11 -  6.4 Minimum energy performance standards (MEPS)
11 -  6.4.1 Australia
11 -  6.4.2 New Zealand
11 -  7 APPLICATION AND TEST RESULT FORMATS
11 -  7.1 Application for registration for MEPS in Australia
11 -  7.1.1 Registration
12 -  7.1.2 Report format
12 -  7.2 Holding of records in Australia
12 -  7.2.1 General
12 -  7.2.2 Test report
12 -  7.2.3 Availability
12 -  7.3 Holding of records in New Zealand
12 -  7.3.1 General
12 -  7.3.2 Test report
12 -  7.3.3 Availability
15 -  APPENDIX A - NOTIFICATION OF ENERGY PERFORMANCE CHARACTERISTICS

Abstract

Specifies classification, labelling and minimum energy performance requirements for ballasts for linear fluorescent lamps for use on 230 V to 250 V a.c. at 50 Hz supply. This Standard is to be read in conjunction with AS/NZS 4783.1.

Technical Committee EL-041 has reviewed the content of this publication and in
accordance with Standards Australia procedures for reconfirmation, it has been determined
that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original
date of publication. Users are advised to ensure that they are using the latest versions of
such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for
reconfirmation on 22 July 2013.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of
New Zealand on 27 August 2013.
The following are represented on Technical Committee EL-041:
Australasian Fire and Emergency Service Authorities Council
Australian Industry Group
Certification Interests, New Zealand
Consumers Federation of Australia
Department of Climate Change and Energy Efficiency
Electrical Compliance Testing Association
Electrical Regulatory Authorities Council
Energy Efficiency and Conservation Authority of New Zealand
Fair Trading NSW
IES: The Lighting Society
Institution of Professional Engineers New Zealand
International Accreditation New Zealand
Lighting Council Australia
Lighting Council New Zealand
New Zealand Ministry of Business, Innovation and Employment
New Zealand Lighting Manufacturers and Suppliers

Scope

This Standard specifies requirements for the classification of ballasts for a range of fluorescent lamp types (refer to Tables 1 to 3) according to their Energy Efficiency Index (EEI) and the form of labelling of the EEI, which is generally shown on the ballast rating plate.
This Standard also specifies the minimum energy performance standards (MEPS) requirements for certain fluorescent lamp ballasts.
The ballasts covered by this Standard are the ferromagnetic or electronic type, that are used with fluorescent lamps with a rated lamp power from 10 W to 70 W, for use on 50 Hz supplies of 230/240/250 V or a range which includes one or more of these voltages.
This Standard covers ballasts that are supplied as separate components or as part of a luminaire.
This Standard does not cover the following ballast-lamp combinations:
(a) Primarily for use on d.c. supply or batteries.
(b) Primarily for the production of light outside the visible spectrum, ie. 400 nm to 800 nm.
(c) For exit signs within the scope of AS/NZS 2293.
(d) Hazardous area lighting equipment, within the scope of AS/NZS 2380, AS/NZS 60079 and AS/NZS 61241 Series of Standards.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmation Notice 28/10/2013
Pages
ISBN
Committee	EL-041
Supersedes	DR 02269 CP