AS/NZS 4812:2003
AS/NZS 4812:2003
Non-destructive examination and discard criteria for wire ropes in mine winding systems
Standards Australia
Abstract
Specifies requirements for non-destructive examination and discard of wire ropes of mine winding systems, including winding, hoisting, balance, rubbing, guide and shaft sinking ropes, but excluding full locked-coil ropes.
Scope
This Standard specifies requirements for non-destructive examination and discard of wire ropes of mine winding systems, including winding, hoisting, balance, rubbing, guide and shaft sinking ropes, but excluding full locked-coil ropes.
This Standard is not intended to replace mine-site inspection schedules or destructive tests. Destructive tests may be required in areas not accessible to a non-destructive examination, or in addition to a non-destructive examination.
NOTES:
1 This Standard is not a rope management system, but should be used as input for such a system.
2 This Standard only applies to the use of full-coil sensor heads with EM instruments.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn. |
| Committee | ME-018 |
| Supersedes |
|
