AS 1247-2004 (R2017)

Table of Contents

<toc />

Abstract

Specifies a method of evaluating the condition of decorative and protective metallic and inorganic coated panels or articles which have been exposed to corrosive environments for test or for other purposes. Identical with and reproduced from ISO 10289:1999.
RECONFIRMATION NOTICE
Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.
The following are represented on Technical Committee MT-009:
Australasian Institute of Surface Finishing
Australian Chamber of Commerce and Industry
Australian Industry Group
Australian Steel Institute
Bureau of Steel Manufacturers of Australia
Galvanizers Association of Australia
Galvanizing Association of New Zealand
New Zealand Metal Roofing Manufacturers

Scope

This International Standard gives a method of evaluating the condition of decorative and protective metallic and inorganic coated panels or articles which have been exposed to corrosive environments for test or for other purposes.
It is applicable to test panels or components exposed to natural atmospheres, in mobile or static conditions, or subjected to accelerated tests.
NOTE 1 Examples of such tests are given in the Bibliography.
This International Standard recognizes that the protection rating can be assessed objectively in accordance with clause 6. However, the assessment of appearance depends on many subjective factors (see 6.2).
NOTE 2 The edges of test panels or components may be protected, e.g. by tape or wax (paraffin), if this is an agreed part of the test and is recorded in the test report. This is essential if the specimens are cut from larger pieces and have exposed uncoated edges.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 07/04/2017. This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/04/2017
Pages
ISBN
Committee	MT-009
Supersedes	AS 1247-1991 DR 03644 CP