AS 1580.408.4-2004

Scope

This Standard sets out a method for assessing the adhesion of paint coatings to substrates by applying and removing pressure-sensitive adhesive tape over cuts made in the coating. The method is also applicable as a field procedure, when not under the controlled environmental conditions of AS 1580.101.1, however the temperature of the surface needs to be recorded. It is not applicable to soft or friable substrates.

The method is not considered suitable for coatings thicker than 125 µm.
The method does not distinguish between high levels of adhesion for which more complex procedures are required, such as a pull-off adhesion test similar to ASTM D4541 or ISO 4624.
In multicoat systems, if adhesion failure occurs between coats, the adhesion of the coating system to the substrate cannot be determined.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
Pages
ISBN
Committee	CH-003
Supersedes	DR 03375 CP AS 1580.408.4-1993