AS/NZS 60320.1:2004

Abstract

Specifies essential safety and associated requirements for two-pole appliance couplers for a.c. only, with or without earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A, for household and similar general purposes and intended for the connection of a supply cord to electrical appliances or other electrical equipment for 50 Hz or 60 Hz supply. Annex ZZ lists variations for Australian and New Zealand conditions.

Scope

This part of AS/NZS 60320 is applicable to two-pole appliance couplers for a.c. only, with or without earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A, for household and similar general purposes and intended for the connection of a supply cord to electrical appliances or other electrical equipment for 50 Hz or 60 Hz supply.
Additional requirements for Group 2 and Group 3 appliance couplers are given in Annex ZA.
NOTE 1 Appliance inlets integrated or incorporated in appliances or other equipment are within the scope of this standard. The dimensional and general requirements of this standard apply to such inlets, but certain tests may not be relevant.
NOTE 2 The requirements for connectors are based on the assumption that the temperature of the pins of the corresponding appliance inlets does not exceed
- 70°C for connectors for cold conditions;
- 120°C for connectors for hot conditions;
- 155°C for connectors for very hot conditions.
NOTE 3 Appliance couplers complying with this standard are suitable for use at ambient temperatures not normally exceeding 25°C, but occasionally reaching 35°C.
NOTE 4 Appliance couplers complying with the standard sheets in this standard are intended for the connection of equipment having no special protection against moisture. If appliance couplers are used with equipment which may be subject to spillage of liquid in normal use then protection against moisture is to be provided by the equipment.
NOTE 5 Special constructions may be required
– in locations where special conditions prevail, for example, as in ships, vehicles and the like;
– in hazardous locations, for example, where explosions are liable to occur.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
Pages
ISBN
Committee	EL-004
Under Revision	DR AS/NZS 60320.1 CP
Supersedes	AS/NZS 3109.1:1996 DR 04350 CP
Superseded By	AS/NZS 60320.1:2012