AS/NZS 1269.0:2005 (R2016)
AS/NZS 1269.0:2005 (R2016)
Occupational noise management Overview and general requirements
Standards Australia
Table of Contents
Abstract
Provides an overview and general requirements for the occupational noise management series of Standards.
RECONFIRMATION NOTICE
Technical Committee AV-003 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 7 December 2015.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 18 May 2016.
The following are represented on Technical Committee AV-003:
Accident Compensation Corporation (New Zealand)
Association of Australian Acoustical Consultants
Australian Acoustical Society
Australian Chamber of Commerce and Industry
Australian Council of Trade Unions
Department of Defence (Australian Government)
Engineers Australia
Ministry of Health (NZ)
National Acoustic Laboratories
New South Wales Nurses' Association
New Zealand Audiological Society
Worksafe Division, Department of Commerce, Western Australia
WorkSafe Victoria
Scope
This Standard provides an overview of the AS/NZS 1269 series and general requirements on occupational noise management. The series deals with noise as it affects hearing, but does not deal with other effects of noise. It also provides an integrated approach to establishing, implementing and evaluating an occupational noise management program.
The setting of occupational noise criteria is not within the scope of this series of Standards. Such criteria are set by regulations or organizational policy, not by Standards Australia or Standards New Zealand. Exposure standards may be found in the occupational health and safety or related regulations that are applicable for the workplace under assessment. Criteria lower than these exposure standards may be set by the organization’s noise policy.
Noise constitutes only one of many relevant workplace issues which should be considered for assessment as a component of an occupational health and safety survey. The AS/NZS 1269 series addresses the most relevant issues associated with occupational noise management. It does not deal with associated issues such as community noise and general environmental noise. Further advice on those issues should be sought from the Standards that deal with these issues.
In undertaking an overall occupational health and safety survey, the program should be carefully planned to ensure that the need for assessment of all other pertinent occupational health and safety issues is considered.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 10/06/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 10/06/2016 |
| Committee | AV-003 |
| Supersedes |
|
