AS 3637.6-2005

Table of Contents

1 -  AS 3637.6-2005 UNDERGROUND MINING-WINDING SUSPENSION EQUIPMENT - SHACKLES AND CHAINS
4 -  PREFACE
5 -  CONTENTS
6 -  1 SCOPE
6 -  2 REFERENCED DOCUMENTS
6 -  3 DEFINITIONS
6 -  3.1 Chain
6 -  3.2 Conveyance
6 -  3.3 Conveyance chain
6 -  3.4 Rating
6 -  3.5 Safety chain
6 -  3.6 Shackle
7 -  4 SIZE DESIGNATION
7 -  4.1 Shackles and chains
7 -  4.2 Conveyance chains
7 -  5 MATERIALS
7 -  5.1 Component type designation
7 -  5.2 Type A components
7 -  5.3 Type B components
7 -  6 DESIGN
7 -  6.1 Static design factor
7 -  6.2 Fatigue reserve factor
7 -  6.3 Rating (see Figure 3)
8 -  6.4 Safety chain length
8 -  7 MANUFACTURE
8 -  7.1 General
8 -  7.2 Chain links
8 -  7.3 Shackle bodies
8 -  8 TESTING
8 -  8.1 Proof load tests
8 -  8.1.1 Shackles and chains
9 -  8.1.2 Master links
10 -  8.1.3 Shackle connections
10 -  8.2 Non-destructive testing
10 -  8.3 Length of chains
10 -  8.4 Wear limits
10 -  9 TEST CERTIFICATES
10 -  9.1 General
10 -  9.2 Shackles
10 -  9.3 Conveyance chains
10 -  10 MARKING
12 -  APPENDIX A - GUIDELINES FOR STATIC AND FATIGUE DESIGN OF SHACKLES
12 -  A1 STATIC DESIGN
13 -  A2 FATIGUE DESIGN
14 -  APPENDIX B - GUIDELINES FOR STATIC AND FATIGUE DESIGN OF CHAIN LINKS
14 -  B1 STATIC DESIGN
15 -  B2 FATIGUE DESIGN
16 -  APPENDIX C - PERMISSIBLE IMPERFECTIONS FOR MAGNETIC PARTICLE INSPECTION
16 -  C1 SCOPE
16 -  C2 GENERAL
16 -  C3 LIMITS OF PERMISSIBLE IMPERFECTIONS
16 -  C4 DESIGNATION
16 -  C5 RECORD

Abstract

Specifies requirements for shackles and chains used in the suspension of vertical mine shaft conveyances. Design, materials, manufacture, marking and testing are specified. Appendices provide guidelines on permissible imperfections for magnetic particle inspection, and design guidelines for shackles and chain links.

Scope

This Standard specifies requirements for the design, manufacture and testing of shackles and chains for use in the suspension of conveyances in underground vertical mine shafts.
General requirements are specified in AS 3637.1.

Guidelines for the design of shackles are given in Appendix A.
Guidelines for the design of chain links are given in Appendix B.
Permissible imperfections in components are given in Appendix C.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
Pages
ISBN
Committee	ME-018
Supersedes	AS 3637.6-1991 DR 04541 CP