AS 1860.2-2006 (R2016)
AS 1860.2-2006 (R2016)
Particleboard flooring Installation
Standards Australia
Table of Contents
Abstract
Proposes procedures for the selection, placement and fixing of Class 1 particleboard flooring complying with AS/NZS 1860.1. Appendices propose check lists for areas of supervision, recommendations for subfloor ventilation, and recommendations on installation procedures for particleboard flooring for general domestic applications.
RECONFIRMATION NOTICE
Technical Committee TM-011 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 27 April 2016.
The following are represented on Technical Committee TM-011:
Australian Building Codes Board
Australian Forest Products Association
Australian Timber Importers Federation
Australian Wood Panels Association
Building Research Association of New Zealand
Engineered Wood Products Association of Australasia
Forest and Wood Products Australia
Furntech-AFRDI
Glued Laminated Timber Association of Australia
Master Builders Australia
Monash University
New Zealand Plywood Manufacturers Association
New Zealand Timber Industry Federation
Timber Design Society
Wood Processors & Manufacturers Association of New Zealand
Scope
This Standard sets out procedures for the selection, placement and fixing of Class 1 particleboard flooring complying with AS/NZS 1860.1.
This Standard does not cover waterproofing procedures necessary for wet area rooms. Wet area rooms are covered by AS 3740.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 17/06/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 17/06/2016 |
| Committee | TM-011 |
| Supersedes |
|
