Coal and coke - Analysis and testing Higher rank coal - Phosphorus - Borate fusion/molybdenum blue method
Standards Australia
<toc />
Sets out a method for the spectrophotometric determination of phosphorus in coal by a borate fusion/molybdenum blue method using a rapid ashing technique. This method does not involve the use of hydrofluoric acid.
RECONFIRMATION NOTICE
Technical Committee MN-001 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 5 October 2016.
The following are represented on Technical Committee MN-001:
Australasian Institute of Mining and Metallurgy
Australian Coal Industry Reference Samples
Australian Coal Preparation Society
Australian Energy Council
Coalfield Geology Council of NSW
CSIRO
Department of Natural Resources and Mines (QLD)
Minerals Council of Australia
National Association of Testing Authorities Australia
The University of New South Wales
The University of Queensland
University of Newcastle
This Standard sets out a method for the spectrophotometric determination of phosphorus in coal by a borate fusion/molybdenum blue method using a rapid ashing technique. The method is rapid and does not involve the use of hydrofluoric acid.
An alternative method is also given for determination of phosphorus in coal, ashed in accordance with AS 1038.3. This method can be used if a very rapid turnaround time is not required, or if ash has already been prepared for analysis.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 28/10/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 28/10/2016 |
| Committee | MN-001 |
| Supersedes |
|
