AS 4292.5-2006

Table of Contents

1 -  AS 4292.5-2006 RAILWAY SAFETY MANAGEMENT - OPERATIONAL SYSTEMS
4 -  PREFACE
5 -  CONTENTS
7 -  FOREWORD
8 -  SECTION 1 SCOPE AND GENERAL
8 -  1.1 SCOPE
8 -  1.2 APPLICATION
8 -  1.3 REFERENCED DOCUMENTS
9 -  1.4 DEFINITIONS
9 -  1.4.1 Cross
9 -  1.4.2 Interlocked
9 -  1.4.3 Occupancy authority
9 -  1.4.4 Pass
9 -  1.4.5 Permissible rolling stock outline
9 -  1.4.6 Points and crossings
9 -  1.4.7 Safeworking system
9 -  1.4.8 Shall
9 -  1.4.9 Should
9 -  1.4.10 Track section
10 -  1.4.11 Train controller
10 -  1.4.12 Train crew
10 -  1.4.13 Work site safety supervisor
10 -  1.4.14 Validation
10 -  1.4.15 Verification
10 -  1.5 FUNCTIONAL AREAS
11 -  1.6 ASSET LIFE CYCLE
11 -  1.7 ADOPTION OF EXISTING PRACTICES
11 -  1.8 HAZARD IDENTIFICATION AND RISK ANALYSIS
13 -  1.9 COMMUNICATION
13 -  1.10 HANDLING OF EXCEPTIONS
14 -  SECTION 2 INTERFACE COORDINATION
15 -  SECTION 3 DESIGN
15 -  3.1 GENERAL
15 -  3.2 SAFEWORKING SYSTEM SELECTION
15 -  3.2.1 Safety level justification
15 -  3.2.2 Selection procedure
15 -  3.2.3 Factors to be considered
16 -  3.3 OPERATIONAL INTEGRITY
16 -  3.3.1 Route integrity
16 -  3.3.2 Train integrity
17 -  3.3.3 Contingency planning
18 -  3.4 CONSTRUCTION SITES
18 -  3.5 SAFETY OF PERSONS
18 -  3.5.1 General requirements
19 -  3.5.2 Factors to be considered
19 -  3.6 VERIFICATION AND VALIDATION
20 -  SECTION 4 CONSTRUCTION AND IMPLEMENTATION
20 -  4.1 GENERAL REQUIREMENTS
20 -  4.2 FACTORS TO BE CONSIDERED
20 -  4.3 VERIFICATION AND VALIDATION
21 -  SECTION 5 COMMISSIONING
21 -  5.1 GENERAL
21 -  5.2 COMMISSIONING PLAN
22 -  SECTION 6 OPERATIONS
22 -  6.1 GENERAL
22 -  6.2 TRAIN MANAGEMENT
22 -  6.3 TRAFFIC MANAGEMENT
23 -  SECTION 7 MONITORING AND MAINTENANCE
23 -  7.1 GENERAL
23 -  7.2 INSPECTION AND MAINTENANCE
23 -  7.2.1 General
23 -  7.2.2 Factors to be considered
23 -  7.3 MONITORING OPERATIONAL PERFORMANCE
23 -  7.3.1 General
23 -  7.3.2 Factors to be considered
24 -  SECTION 8 MODIFICATION
25 -  SECTION 9 DECOMMISSIONING AND DISPOSAL
26 -  APPENDIX A - ASSET LIFE CYCLE PHASES-DESCRIPTION AND PROCESS REQUIREMENTS
30 -  APPENDIX B - INTERFACES BETWEEN ENGINEERING AND OPERATIONAL FUNCTIONS
34 -  APPENDIX C - SAFEWORKING OCCUPANCY CONTROL
34 -  C1 GENERAL
34 -  C2 SAFETY MANAGEMENT REQUIREMENTS
35 -  C3 TYPES OF TRACK OCCUPANCY
35 -  C3.1 General
36 -  C3.2 Joint occupancy rules
36 -  C4 TRANSMISSION, EXECUTION AND FULFILMENT OF OCCUPANCY AUTHORITIES
38 -  APPENDIX D - OTHER OPERATIONAL SYSTEMS
39 -  APPENDIX E - EXAMPLES OF OCCUPANCY CONTROL SYSTEMS
39 -  E1 GENERAL
39 -  E2 ELECTRONIC AUTHORITY
39 -  E3 CENTRALIZED TRAFFIC CONTROL
39 -  E4 AUTOMATIC TRACK SECTION (BLOCK) SIGNALLING
39 -  E5 ELECTRIC STAFF
40 -  E6 STAFF AND TICKET
40 -  E7 TRAIN ORDER WORKING
41 -  APPENDIX F - EXAMPLES OF OCCUPANCY AUTHORITIES
41 -  F1 GENERAL
41 -  F2 DESCRIPTION AND USE
41 -  F2.1 Proceed authority (PA)
41 -  F2.2 Conditional proceed authority (CPA)
42 -  F2.3 Proceed restricted authority (PRA)
42 -  F2.4 Work authority (WA)
43 -  F2.5 Shunt authority (SHA)
43 -  F2.6 Authorities for track workers
43 -  F2.7 Local possession authority (LPA)
45 -  APPENDIX G - APPLICATION OF JOINT OCCUPANCY RULES
45 -  G1 GENERAL
45 -  G2 ISSUE OF AUTHORITIES
45 -  G3 OTHER TRACK WORK ARRANGEMENTS

Abstract

Specifies technical requirements for operational systems to be considered for engineering and operating systems safety Standards forming part of a railway safety management system prepared in accordance with AS 4292.1.

Scope

This Standard specifies requirements and provides guidelines for preparing or adopting engineering and operating systems safety standards and procedures to comply with the relevant requirements of AS 4292.1, in respect of design, installation, operation and maintenance of operational systems.
The Standard provides broad, high level principles intended to foster uniformity in railway operational systems ranging from the sophisticated controls required for high volume, high speed heavy rail systems to low volume heavy rail systems and to the special needs of light rail. The breadth of these principles invites them to be interpreted to cover all of the control environments currently existing or likely to develop in the foreseeable future in Australia whilst at the same time ensuring that the essential elements of safe and uniform practice are incorporated within those environments.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
Pages
ISBN
Committee	ME-079
Supersedes	DR 05557 AS 4292.5-1997