AS/NZS 2009:2006 (R2016)
AS/NZS 2009:2006 (R2016)
Glass beads for pavement-marking materials
Standards Australia
Table of Contents
Abstract
Specifies materials and design requirements for glass beads with retroreflective properties for use in pavement-marking materials.
RECONFIRMATION NOTICE
Technical Committee SF-004 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 31 May 2016.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 5 July 2016.
The following are represented on Technical Committee SF-004:
Australasian Fire and Emergency Service Authorities Council
Australian Chamber of Commerce and Industry
Australian Industry Group
AWTA Textile Testing
Certification Interests (Australia)
Communications, Electrical and Plumbing Union - Electrical Division
Council of Textile and Fashion Industries of Australia
Department of Defence (Australian Government)
Energy Networks Association
New Zealand Road Safety Manufacturers Association
NSW Rural Fire Service Association
Safety Institute of Australia
Testing Interests (Australia)
Textile Clothing & Footwear Union of Australia
University of Otago New Zealand
University of Western Sydney
Scope
This Standard specifies material and design requirements for glass beads with retroreflective properties, which are intended for incorporation into pavement-marking materials. It applies to glass beads intended to improve the visibility of pavement-marking materials by reflecting the light from vehicle headlamps back to the driver under night-time conditions.
Sampling, testing and certification shall be in accordance with Appendices A and J.
NOTE: Additional information on the types of glass beads available for use with pavement-marking materials is given in Appendix B.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 07/10/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 7/10/2016 |
| Committee | CH-003 |
| Under Revision |
|
| Supersedes |
|
