AS 1447-2007 (R2017)
AS 1447-2007 (R2017)
Hot-rolled spring steels
Standards Australia
Abstract
Specifies the requirements for hot-rolled carbon, carbon-chromium, nickel-chromium-molybdenum and silicon-manganese spring steels which are in either the as-rolled, annealed or normalized condition.
RECONFIRMATION NOTICE
Technical Committee MT-001 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 04 June 2017.
The following are represented on Technical Committee MT-001:
Australian Building Codes Board
Australian Steel Association
Australian Steel Institute
Bureau of Steel Manufacturers of Australia
Employers and Manufacturers Association
Materials Australia
New Zealand Heavy Engineering Research Association
Society of Automotive Engineers- Australasia
Scope
This Standard specifies requirements for hot-rolled carbon, carbon-chromium, nickel-chromium-molybdenum and silicon-manganese spring steels which are in either the as-rolled, annealed or normalized condition. It specifies chemical composition and manufacturing tolerance requirements for all grades and end-quench hardenability requirements for hardenability grades. This Standard permits the addition of boron and micro-alloying elements for the achievement of special properties.
NOTES;
1 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry and order are contained in the purchasing guidelines in Appendix A.
2 For a guide to a means of complying with the Standard refer to Appendix B.
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 07/07/2017. This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/07/2017 |
| Committee | MT-001 |
| Supersedes |
|
