AS 4049.5-2007 (R2018)

Table of Contents

1 -  AS 4049.5-2007 PAINTS AND RELATED MATERIALS-PAVEMENT MARKING MATERIALS - PERFORMANCE ASSESSMENT OF PAVEMENT MARKINGS
4 -  PREFACE
5 -  CONTENTS
6 -  FOREWORD
7 -  1 SCOPE
7 -  2 OBJECTIVE
7 -  3 REFERENCED DOCUMENTS
7 -  4 DEFINITIONS
7 -  4.1 Aggregate
7 -  4.2 Audio tactile marking
7 -  4.3 Pavement marking systems
7 -  4.4 Retroreflectivity
7 -  4.5 Skid resistance
7 -  4.6 Slip resistance
7 -  4.7 Substrate
8 -  4.8 Test pavement
8 -  5 TYPES OF PAVEMENT MARKING MATERIALS
8 -  6 TYPES OF PAVEMENT MARKINGS
8 -  7 PERFORMANCE PARAMETERS
8 -  7.1 General
8 -  7.2 Performance parameters
8 -  7.2.1 Daytime visibility
8 -  7.2.2 Retroreflectivity
8 -  7.2.3 Wear
9 -  7.2.4 Skid resistance
9 -  7.2.5 Slip resistance
9 -  7.2.6 Luminance factor
9 -  7.2.7 Colour
9 -  7.2.8 Colour change
9 -  7.2.9 Audio tactile performance
9 -  7.3 Performance levels
9 -  7.3.1 General
9 -  7.3.2 Performance limits
10 -  8 PERFORMANCE ASSESSMENT
10 -  8.1 General
10 -  8.2 Sampling
10 -  8.3 Assessment procedures
10 -  8.3.1 Daytime visibility
10 -  8.3.2 Retroreflectivity
10 -  8.3.3 Degree of wear
10 -  8.3.4 Skid resistance
11 -  8.3.5 Slip resistance
11 -  8.3.6 Luminance factor
11 -  8.3.7 Colour change
11 -  8.3.8 Audio tactile performance
11 -  8.4 Testing
11 -  9 USE OF PERFORMANCE ASSESSMENT DATA
12 -  APPENDIX A - LIST OF REFERENCED DOCUMENTS
13 -  APPENDIX B - FACTORS AFFECTING THE PERFORMANCE OF PAVEMENT MARKING SYSTEMS
13 -  B1 SCOPE
13 -  B2 PAVEMENT TEXTURE
13 -  B3 APPLICATION CONDITIONS
13 -  B4 APPLICATION EQUIPMENT
13 -  B5 APPLICATION RATE
13 -  B6 AGGREGATES
13 -  B7 GLASS BEADS
14 -  B8 PROTECTION FROM TRAFFIC
14 -  B9 TRAFFIC TYPE AND VOLUME
14 -  B10 ROAD GEOMETRY AND DIMENSIONS
14 -  B11 INITIAL OR SUBSEQUENT APPLICATION
14 -  B12 COMPATIBILITY ISSUES
14 -  B13 EFFECT OF CONTAMINANTS OR PRE-TREATMENT
14 -  B14 PAVEMENT LUMINANCE
15 -  APPENDIX C - DRIVE-THROUGH ASSESSMENT OF MARKING VISIBILITY
15 -  C1 SCOPE
15 -  C2 VISIBILITY ASSESSMENT
15 -  C2.1 Methods
16 -  C3 ASSESSMENT CRITERIA
17 -  APPENDIX D - DEVELOPMENT OF PERFORMANCE ASSESSMENT SAMPLING PLANS
17 -  D1 SCOPE
17 -  D2 STATISTICAL SAMPLING
17 -  D3 DEVELOPMENT OF A SAMPLING PLAN
17 -  D3.1 General
17 -  D3.2 Performance parameters
17 -  D3.3 Procedures
17 -  D3.4 Sampling frequency
17 -  D3.5 Sampling location
18 -  D3.6 Number of tests
20 -  APPENDIX E - USE OF PERFORMANCE ASSESSMENT DATA
20 -  E1 SCOPE
20 -  E2 USE OF PERFORMANCE DATA
20 -  E3 CONTRACT COMPLIANCE
20 -  E4 APPROVAL OF NEW PRODUCTS
20 -  E5 PROGRAMMING MAINTENANCE
21 -  E6 PERFORMANCE CURVES
21 -  E7 RISK MANAGEMENT
21 -  E8 PERFORMANCE COMPARISON
21 -  E9 ROAD SAFETY AUDITING

Abstract

Specifies procedures for the assessment of the field performance of pavement markings, including the development of sampling plans and strategies for the use of gathered data.

RECONFIRMATION NOTICE
Technical Committee CH-003 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 14 June 2018.
The following are represented on Technical Committee CH-003:
Australasian Corrosion Association
Australian Institute of Building
Australian Paint Manufacturers Federation
Australian Wall and Ceiling Association
Engineering New Zealand
Master Painters Australia
Master Painters New Zealand Association
National Association of Testing Authorities Australia
National Painting and Decorating Institute
Surface Coatings Association Australia

Scope

This Standard provides procedures for the assessment of the field performance of pavement markings, including the development of sampling plans and strategies for the use of gathered data. Pavement marking systems covered by this Standard include those providing delineation and guidance for vehicles and pedestrians.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 24/08/2018. This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 24/08/2018
Pages
ISBN
Committee	CH-003
Supersedes	DR 06735