AS/NZS 3750.5:2008

Abstract

Specifies requirements for a two-component, solvent-borne full gloss acrylic paint intended to be used for the protection of iron and steel against exterior atmospheric corrosion.

Scope

This Standard specifies requirements for a two-component, solvent-borne full gloss acrylic paint intended to be used for the protection of iron and steel against exterior atmospheric corrosion. It is primarily designed for application by conventional air or airless spraying. It is also suitable for application to small areas by brush or roller.
This paint is intended for use as a decorative topcoat where good colour or gloss retention is required in paint systems for the protection of iron and steel against corrosion involving wet and damp areas, high humidity, coastal/marine and industrial fallout.
Paint specified in this Standard is described in AS/NZS 2312 as Paint Reference No. C33 and may be used with the appropriate primer in systems ACC1 to ACC6 of AS/NZS 2312.
NOTES:
1 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.
2 Additional information on the use and application of acrylic full gloss (two-pack) paints is contained in Appendix B.
3 The paint is available in a range of colours.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
Pages
ISBN
Committee	CH-003
Supersedes	AS/NZS 3750.5:1994 DR 04189