IEC 62047-31 Ed. 1.0 en:2019

IEC 62047-31 Ed. 1.0 en:2019 Semiconductor devices - Micro-electromechanical devices - Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials
standard by International Electrotechnical Commission, 04/05/2019

More info

Full Description

IEC 62047-31:2019 (E) specifies a four-point bending test method for measuring interfacial adhesion energy of the weakest interface in the layered micro-electromechanical systems (MEMS) based on the concept of fracture mechanics. In a variety of MEMS devices, there are many layered material interfaces, and their adhesion energies are critical to the reliability of the MEMS devices. The four-point bending test utilizes a pure bending moment applied to a test piece of layered MEMS device, and the interfacial adhesion energy is measured from the critical bending moment for the steady state cracking in the weakest interface. This test method applies to MEMS devices with thin film layers deposited on semiconductor substrates. The total thickness of the thin film layers should be 100 times less than the thickness of a supporting substrate (typically a silicon wafer piece).