AS 5602-2009

Refined petroleum products - Vehicle bottom loading and vapour recovery

Standards Australia

More info

1 - AS 5602-2009 REFINED PETROLEUM PRODUCTS-VEHICLE BOTTOM LOADING AND VAPOUR RECOVERY
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AND GENERAL
6 - 1.1 SCOPE
6 - 1.2 APPLICATION
6 - 1.3 REFERENCED DOCUMENTS
6 - 1.4 DEFINITIONS AND ABBREVIATIONS
7 - 1.4.1 Adaptor
7 - 1.4.2 ADG Code
7 - 1.4.3 AIP
7 - 1.4.4 API
7 - 1.4.5 Approved
7 - 1.4.6 Coupler
7 - 1.4.7 Shall
7 - 1.4.8 Should
7 - 1.4.9 Switch loading
7 - 1.4.10 VR
7 - 1.4.11 VT
7 - 1.5 ROAD TANK VEHICLES
8 - SECTION 2 PRODUCT CONNECTIONS FOR LOADING
8 - 2.1 SCOPE OF SECTION
8 - 2.2 ADAPTOR SPECIFICATION
8 - 2.3 COUPLER SPECIFICATIONS
9 - 2.4 LOCATION OF ADAPTORS
11 - SECTION 3 VAPOUR RECOVERY CONNECTIONS
11 - 3.1 SCOPE OF SECTION
11 - 3.2 REQUIREMENTS FOR ADAPTORS AND COUPLERS
13 - 3.3 VAPOUR RECOVERY HOSE AND PIPING
14 - SECTION 4 VEHICLE OVERFILL PROTECTION SYSTEM
14 - 4.1 SCOPE OF SECTION
14 - 4.2 TANK COMPARTMENT SENSING ELEMENT
14 - 4.3 CONNECTION BETWEEN FILL STAND AND VEHICLE
16 - SECTION 5 INTERLOCKS ON THE FILL STAND
16 - 5.1 SCOPE OF SECTION
16 - 5.2 LOADING SYSTEM INTERLOCKS
16 - 5.3 OVERFILL PROTECTION SYSTEM
17 - SECTION 6 INTERLOCKS ON THE TANK VEHICLE
17 - 6.1 SCOPE OF SECTION
17 - 6.2 VEHICLE DRIVEAWAY PROTECTION
17 - 6.3 COMPARTMENT VAPOUR TRANSFER VALVES
17 - 6.4 STOWING OF VAPOUR HOSE ON VEHICLE
18 - SECTION 7 UNLOADING WITH VAPOUR RECOVERY
18 - 7.1 SCOPE OF SECTION
18 - 7.2 PRODUCT CONNECTIONS
18 - 7.2.1 Underground storage tanks
18 - 7.2.2 Above-ground storage tanks
18 - 7.3 VAPOUR RECOVERY CONNECTIONS
18 - 7.3.1 Underground storage tanks
18 - 7.3.2 Above-ground storage tanks
18 - 7.4 OVERFILL PROTECTION FOR THE RECEIVING TANK
20 - SECTION 8 UNLOADING WITHOUT VAPOUR RECOVERY
20 - 8.1 SCOPE OF SECTION
20 - 8.2 LOADING WITHOUT VAPOUR RECOVERY
20 - 8.3 UNLOADING WITHOUT VAPOUR RECOVERY

Scope

This Standard provides requirements and recommendations for use by the refined petroleum industry in terms of vapour recovery equipment for vehicles equipped for bottom loading and for vehicle fill stands designed for bottom loading and having vapour recovery facilities. It covers the design and operation of vapour recovery equipment on vehicles and fill stands.
The purpose of this Standard is to ensure that all tank vehicles fitted for bottom loading and vapour recovery are compatible and can be safely loaded at fill stands equipped for bottom loading, including those equipped for vapour recovery. It also covers unloading into receiving tanks.
It is intended to be used in conjunction with regulations relating to environmental matters and the storage and handling of dangerous goods.