IEEE 390-1975

IEEE 390-1975 IEEE Standard for Low Power Pulse Transformers
standard by IEEE, 06/18/1975

More info

Full Description

Scope

This standard pertains t o small low-power pulse transformers for use in electronic equipment, transmitting peak power of 300 W or less and average power of 5W or less with a peak working voltage of 1000 V or less. These transformers are required to transform unipolar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. This standard is not intended to include low-power switching type pulse transformers which are covered in IEEE Std 272-1970, Standard for Computer-Type (Square-Loop) Pulse Transformers. These transformers depend upon the use of square - loop core material for operation, have memory capability, and normally transmit only bipolar pulses unless provision is made for core flux reset. This standard is not intended to include transformers for power conversion applications. T h o s e transformers will be covered in a related standard. Whenever numerical values are indicated they may be considered as recommended values. Section 2 contains definitions of terms pertaining primarily to functional testing of low-power pulse transformers, and Section 5 contains equivalent circuits a n d definitions of associated terms. Section 6 describes preferred transformer test methods and the appendix contains alternate test methods.

Purpose

The purpose of this standard is to provide a common ground of understanding between electronic system engineers and pulse transformer design engineers. It pertains to low-power pulse transformers for use in electronic equipment. It does not include computer-type (square-loop) pulse transformers, which depend upon the use of square-loop core material for operation. Those transformers, often referred to as " switching " or " square - loop " types, are covered in IEEE Std 272-1970, Standard for Computer - Type (Square-Loop) Pulse Transformers. High-power pulse transformers will be covered in a related standard.